First Stem Mold

I installed the braces for the station molds and the first stem mold. Each of the molds have been marked with a vertical center line and a horizontal line 10 inches up from the base. If everything goes correctly each of the molds will be in alignment in both the vertical and horizontal plane. This alignment does not need to be perfect but I don’t want to start accumulating too many errors this early in the process. The next station mold to be installed is Station 1 followed by station 2, 3, 4 … until I install the other stem. I will setup my laser level to help make sure that the stem mold and each of the station molds are in alignment.

Comments are closed.