Puddle Duck Molds

The molds for the Puddle Duck were cut on a ShopBot CNC Router out of 3/4 MDF. Shown are one half of the molds, the mold for station 4 and the stem. The puddle duck is symmetrical so the molds for stations 1 &7, 2 & 6, 3 & 5 and the stems are the same. The clamping strips have been attached to the molds, so with a little sanding to clean up the edges the molds are ready to go. Clear packing tape will be put on the edges of the molds to keep the strips for sticking to them.

Comments are closed.