Scraping and Sanding

I have started the scraping and sanding of the epoxy on the canoe.  I used a cabinet  scraper to get the most of the lumps off and then went over the area with a random orbital sander.  I still have to make one more pass and then I will put another coat of epoxy on to fill the low spots.  I will try using the cabinet scraper when the epoxy is green to see if I can reduce the sanding later.

One Response to “Scraping and Sanding”

  1. George says:

    Any progress on the canoe? I just started the same build, haven’t found many online that have built this particular canoe. Your work is looking good so far.